Flame Retardants - Lacquers   FLAMLAC A high solid, two pack material of alkyd and amino resins which, when catalysed, will cold cure to give a tough resilient film, giving good heat, alcohol and water resistance. Flamlac, when used on Class 1 and Class 0 rated surfaces, will maintain the Class 1 and Class 0 rating. Approved for severe use to FIRA standard 6250: 1999.
		Flame retardant acid catalysed lacquers will not upgrade timber or veneered timber boards to Class 1 and Class 0. For application to veneered fire boards, where a clear finish is required, treat veneer with Flamsol flame retardant solution prior to application of Flamlac. Where timber or timber boards require upgrading to Class 1 and Class 0, use Bollom’s Intuclear, Intulac or Broflame intumescent coatings.

FLAMSOL A solvent based solution of Flame retardant salts, Flamsol, when used on a veneer applied to a fire rated board, will restore a Class 1 rating when used in conjunction with Flamlac acid catalysed Lacquer. Please note: these 2 products are often used together to give the correct fire rating